06
WHITE
AXMINSTER
W
General Instructions for 230v Machines...
www.axminster.co.uk
Once the saw is mounted, carry out any setting operations, (mitre, tilt..?),
and remove all tools used in the setting operations (if any) and place safely
out of the way. If you are using long lengths of material arrange for extra
support beyond the boundary of the machine.
It is good practice to leave the machine unplugged until work is about to
commence, also make sure to unplug the machine when it is not in use. Always
disconnect by pulling on the plug body and not the cable.
DO NOT use your hands to hold the work on the machine, use the clamps provided, and
observe the old woodworkers adage of 'never putting your hands closer than one
handbreadth to the cutting tool'. Do not attempt to cut or re-cut short pieces that cannot be
held by the clamp.
Make sure you are comfortable before you start work, balanced, not reaching etc.
If the work you are carrying out is liable to generate flying grit, dust or chips, wear the
appropriate safety clothing, goggles, gloves, masks etc., If the work operation appears to be
excessively noisy, wear ear-defenders. If you wear your hair in a long style, wearing a cap,
safety helmet, hairnet, even a sweatband, will minimise the possibility of your hair being
caught up in the rotating parts of the tool, likewise, consideration should be given to the
removal of rings and wristwatches, if these are liable to be a 'snag' hazard.
DO NOT work with cutting tools of any description if you are tired, your attention is
wandering or you are being subjected to distraction. A deep cut, a lost fingertip or worse, is
not worth it!
DO NOT work with cutting tools if you are taking prescribed medicine, unless you have
confirmed that this medicine will not impair your awareness or your reactions.
DO NOT use the machines within the designated safety areas of flammable liquid stores or
in areas where there may be volatile gases. There are very expensive, very specialised
machines for working in these areas, THIS IS NOT ONE OF THEM.
CHECK that saw blades are undamaged and are kept clean and sharp, this will maintain
their operating performance and lessen the loading on the tool.
Above all, OBSERVE…. make sure you know what is happening around you, and USE
YOUR COMMON SENSE; for no matter how many precautions we list, remember your
safety is ultimately your responsibility.
WARNING!!
!
UNDER NO CIRCUMSTANCES SHOULD
CHILDREN BE ALLOWED IN WORK AREAS
General Safety Precautions for Compound Mitre Saw
Before using the saw read the instructions thoroughly and make sure you understand them.
Carry out a visual inspection of the saw, checking for damage, or anything untoward, (Do
you know who used it last? That person may be able to confirm that the saw was “fine”
when last used or not, blades need sharpening/replacing etc.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals