Axminster T-2000CK Instruction Manual

T-2000CK 2hp Cyclone ExtractorCode 505088

Step 17 . Place the upper dust drum (R) onto the lower dust drum (Q) as shown, with suction pips on bottom drum opposite Window of top drum. Fit the b

Step 20 Put the big PE Bag (S) inside the dust drum. And try to get air between the Drum and PE bag out as much as possible Step 21 Assemble reduc

Step 23 Small PE Bag Install Place the small PE bag (P) as shown on canister filter bottom and fixing by the Belt clamp (X) 1 Step 24 Assemb

Part List    1 Motor  1 2 Main Housing  1 3 Aluminum Impeller 12-3/4" 1 4 Reducing Collector 

NO. Description Specification Q'TY 53 Connecting Tube  3 54 Lower Leg  3 55 Power Cord W/ Plug  1 56 N Type Handle  1 57 Cap Scr

General Machinery Safety Instructions Read this entire Manual before using this machine. 1. Read the entire Manual before starting machinery. Machiner

Wood Dust Collector Safety Instructions Read this entire Manual before using this machine. 1. Maintenance. Make sure the Dust collector is turned off

Axminster Tools & Machinery LtdWeycroft Avenue, Axminster, Devon EX13 5PHaxminster.co.ukPlease dispose of packaging for the product in a responsib

3

INVENTORY LIST C1 A Q B G F O A1 B1 H I R Z J T N E K L W C D S P X V Y M U A. Reducing Collector N. Lower Leg (Short-2 off) B. Round Collector O.

Machine Assembly 12 of Cap Screws Step 1 Assemble Round Collector Main Housing Place the main housing (F) upside down, and place the Round Collect

Step 3 Assemble Connecting tube Fit the connecting bracket tube (E) with upper leg (O), and fixing by 5/16” Button HD screw Step 4 leg tube Fit the lo

Step 6 Assemble Short Support Tube brace Fit the short Support Tube Brace (B1) as shown, and fixing by 5/16” Button HD screw B1 Step 7 Assemble 7” (U)

Step 9 Fit Switch & Gage 9A) Assemble the Magnetic Switch Place the Magnetic Switch under the Main Housing as photo and fix by 5/16” Flange Bolt

Step 13 Fit top lid (D) Please the main Housing cover with Main Housing and fit as photo 3/16" x 3/8 socket head cap screws. Step 14 Assemble