2004600882SIEG C1 Micro Lathe Mk2Axminster Reference No: C1Mk 2 Part No: 600882User ManualWHITEAXMINSTERWwww.axminster.co.uk
10Parts Identification and Description (Continued)Leadscrew A round centre rib switch/lever, which allows selection of the leadscrew toselector ‘auto
Machine Illustration of the Micro-Lathe (Continued)11Lathe bedTraverse slideSaddle controlTraverse slide thimbleTailstock barrelcontrolFig 3Lathe bedT
Gear change A reeded knob screwed into the front of the headstock, it locates in a slotcover knob in the change gear cover, and is used to secure the
13Machine Illustration of the Micro-Lathe (Continued)Motor securingboltsFig 4TailstockTailstock barrelcontrolTailstock barrel lockTailstockcentreFig 5
14Machine Illustration of the Micro-Lathe (Continued)Motor(Splash guard removed for clarity)Motor brushcapsMotor brushcapsFig 6Saddle gybe strip adjus
15Settings and adjustmentsYour microlathe has been factory set and adjusted, however, during its life timeyou may find occasion whereby the lathe need
16Maintenance Your Microlathe is a precision tool. In order to maintain this precision and prolong itsuseful life, it is advised that you follow the r
17Monthly Check the belt tension. If necessary reset the belt tension by loosening the two motor securingcaphead bolts, retension the belt and re-secu
18Illustrated Parts Breakdown for the Micro Lathe (Part 1)
19Illustrated Parts Breakdown for the Micro Lathe (Part 2)
Page No.Index of Contents02The undersigned, Ole Stilling authorised by Shanghai SIEG Machinery Co., Ltd.No.555 Caofeng Rd., South to No.17Bridge of Ca
20Illustrated Parts catalogue for the Micro Lathe (Part 1)
21Illustrated Parts catalogue for the Micro Lathe (Part 2)PC Board Replacement Part No:Part No: 600883
22Micro Lathe (Accessories)Vertical slidePart No: 100028)112mm T- slot 8mm Face platePart No: (100025)Travelling steadyPart No: (100027)Fixed steadyPa
23Change Gear TableFig 8Fig 9
WHITEAXMINSTERW2004600882www.axminster.co.ukAxminster Devon EX13 5PH UKFREEPHONE 0800 371822Axminster Reference No: C1Mk 2 Part No: 600882SIEG C1 M
Quantity Item Model Number1 No. Micro Lathe with Chuck, Chuck Guard and Tool Post fitted. C1 Box containing:-1 No. Set (3) External Jaws for
Good Working Practices/Safety The following suggestions will enable you to observe good working practices, keep yourself and fellowworkers safe and m
05Initial Assembly and TestingIdeally, your lathe should be installed close to a correctly rated power supply, in a warm dryenvironment, well ventilat
06f) Check the Autofeed/Manual Lever is set to manual (Hand logo).g) Close the chuck guard.h) Check the speed control is switched OFF (fully anti-clo
07SpecificationsDefinitionsMain Axis This is the axis established through the spindle of the headstock. It is horizontal to and parallel with
08Parts Identification and Description Please take some time to identify the various parts of your machine so that you arefamiliar with the terminolog
09Machine Illustration of the Micro-LatheHeadstockChange gear coverMounting flangeChuck safety cover(Chuck & safety cover removed for clarity)Chuc
Comments to this Manuals