Axminster HBS350N Operations Instructions download pdf (Page 10)

Main Assembly

Step 5 Locate the micro adjuster assembly (6),

remove the two Phillips screws and remove the

mounting bracket from the assembly. Insert the

mounting bracket into the ‘T’ slot to the right side of

the fence casting assembly (4), see ﬁg 14. Line up the

holes in the micro adjuster (6) with the holes in the

mounting bracket, making sure the pinion engages

into the rack beneath the fence guide rail (2). Using

the Phillips screws and washers you removed earlier

secure the micro adjuster in position, see ﬁg 15.

Fig 13

Fig 14

Fig 15

Check the guide fence is set parallel to the blade.

Any slight discrepancy can be taken out by loosening

the four Hex bolts that secure the blade of the guide

fence to the clamping body, adjust and re-tighten,

see ﬁg 16. Larger discrepancies may require that the

fence rail is angled slightly.

The dimensioning scale has a adjustable index plate

set in the fence guide front clamp body to enable the

scales to be zero read, see ﬁgs 17-18.

Fig 16

Fig 17-18

Push down the locking lever

Guide fence Hex bolts

Dimensioning scale

Magnifying scale

Mounting bracket

Screwdriver

“T” slot

Rack

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

No comments

Axminster HBS350N Operations Instructions Page 10