Axminster SIEG X1 Super Micro Mill Mk2 User Manual download pdf (Page 3)

Quantity Item Model Number

1 No. Micro Mill with Chuck and Draw Bar fitted X1

Box containing:-

1 No. Chuck Key

3 No. Rod Handles (detached for packing)

1 No. Double Open Ended Spanner 5mm A/F x 5.7mm A/F

1 No. Double Open Ended Spanner 8mm A/F x 10mm A/F

1 No. Nipple ‘C’ Spanner 28mm-32mm

1 No. Allen Key 3mm

1 No. Allen Key 6mm

4 No. ‘T’ Slot Keepers

1 No. Tommy Bar

1 No. Oiling Bottle

1 No. Spare Fuse (250v x 1 Amp)

1 No. Manual

1 No. Guarantee Card

What’s in the Box?

Please read the Instruction Manual prior to using your new machine; as well as

the installation procedure, there are daily and periodic maintenance recommendations to

help you keep your machine on top line and prolong its life. Keep this Instruction Manual

readily accessible for any others who may also be required to use the machine.

Having unpacked you machine and its accessories, please check the contents against the

equipment list "What’s in the box", if there are any discrepancies, please contact Axminster Power

Tool Centre using the procedures laid down in the catalogue. Please dispose of the packaging

responsibly, much of the material is bio-degradable. The machine and its accessories will arrive

coated with heavy corrosion preventative grease. This will need to be cleaned from the machine,

its components and accessories prior to it being set up and commissioned. Use coal oil, paraffin

or a proprietary degreaser to remove the barrier grease. Be warned, it will stain if you splash it on

clothing etc., wear overalls, coverall et al., rubber gloves are also a good idea, as is eye

protection if your cleaning process tends to be a little bit enthusiastic. After cleaning, lightly coat

the exposed metal surfaces of the machine with a thin layer of light machine oil. N.B If you used

paraffin/kerosene make sure you apply this thin film sooner rather than later.

1 2 3 4 5 6 7 8 ... 23 24

No comments

Axminster SIEG X1 Super Micro Mill Mk2 User Manual Page 3