Axminster AWSL Instruction Manual download pdf (Page 10)

Parts Description and Identification

Toolrest A stright stem with a shaped cast metal blade forming a ‘T’ profile. It fits

into the banjo, and is locked in position for height and approach angle

to support the turning tools being used on the workpiece.

Tailstock This casting has a machined base which locates in the slot between and

sits across the two surfaces of the bed. There is a similar mechanism

(cam lift) to that fitted to the banjo to lock the tailstock in position. The

upper part of the casting carries the tailstock barrel, the centreline of

which is in line with the headstock centreline. The barrel can be

advanced or returned using the control wheel. The barrel can be held in

position using its lock (a lift and shift handled lever bolt) which pinches

the barrel in the casting. The barrel is bored to accept 2MT tools.

On/Off switch Standard on/off switch assembly, with ‘I’ indicating the on button and ‘O’

assembly indicating the off button. The switch is NVR.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Axminster AWSL Instruction Manual Page 10