Axminster AWSL Instruction Manual download pdf (Page 3)

What’s in the Box

General Instructions for 230V Machines

Quantity Item Model Number

Box 1 MC1018

1 No. AWSL Lathe Headstock and Tailstock fitted

1 No. Toolrest Arm Fitted to lathe bed

1 No. 140mm Tool rest Fitted to Toolrest arm

1 No. 80mm Faceplate Fitted to Headstock

1 No. Packet containing:-

1 No. 4 Prong Drive Centre

1 No. Revolving Centre

1 No. Handle for Tailstock Adjusting Wheel

2 No. Rubber Feet with integral M8 bolts (for use with the Bed Extension)

2 No. Flat Washers

2 No. Spring Washers

1 No. 8mm Allen Key

1 No. 6mm Allen Key

1 No. 3mm Allen Key

1 No. Instruction Manual

1 No. Guarantee Card

Box 2

1 No. AWSL Bed Extension (OPTIONAL )

1 No. Instruction Leaflet

2 No. Bolts

Having unpacked your new AWSL woodturning lathe please dispose of the unwanted packaging

responsibly. The cardboard packaging is biodegradable.

These machines are supplied with a moulded 13 Amp. Plug and 3 core power cable. Before using the

machine inspect the cable and the plug to make sure that neither are damaged. If any damage is visible

have the tool inspected/repaired by a suitably qualified person. If it is necessary to replace the plug, it is

preferable to use an ‘unbreakable’ type that will resist damage. Only use a 13 Amp plug, and make sure

the cable clamp is tightened securely. Fuse as required. If extension leads are to be used, carry out the

same safety checks on them, and ensure that they are correctly rated to safely supply the current that

is required for your machine.

The following suggestions will enable you to observe good working practices, keep yourself and

fellow workers safe and maintain your tools and equipment in good working order.

Good Working Practices/Safety

Primary Precautions

WARNING!!

KEEP TOOLS AND EQUIPMENT OUT

OF THE REACH OF YOUNG CHILDREN

1 2 3 4 5 6 7 8 ... 15 16

No comments

Axminster AWSL Instruction Manual Page 3