Axminster WS1000TA Specifications download pdf (Page 6)

What’s in the Box

Good Working Practices/ Safety

The following suggestions will enable you to observe good working practices, keep yourself and fellow workers

safe and maintain your tools and equipment in good working order.

General Instructions for 230V Machines

WARNING! KEEP TOOLS AND EQUIPMENT OUT OF THE

REACH OF YOUNG CHILDREN!

Mains Powered Tools

Primary Precautions

This machine is supplied with a moulded 16 Amp. Plug

and 3 core power cable. Before using the tool inspect

the cable and the plug to make sure that neither are

damaged. If any damage is visible have the tool

inspected/repaired by a suitably qualified person. If it is

necessary to replace the plug, it is preferable to use an

‘unbreakable’ type that will resist damage on site. Only

use a 16 Amp plug, and make sure the cable clamp is

tightened securely. Fuse as required. If extension leads

are to be used, carry out the same safety checks on

them, and ensure that they are correctly rated to safely

supply the current that is required for your machine.

Work Place/Environment

The machine is not designed for sub-aqua operation, do

not use when or where it is liable to get wet. Do not use

230V powered tools anywhere within a site area that is

flooded and do not trail extension cables across wet

areas.

Keep the machine clean; it will enable you to more

easily see any damage that may have occurred. Do

not use any solvents or cleaners, as these may cause

damage to any plastic parts or to the electrical

components.

1 2 3 4 5 6 7 8 9 10 11 ... 43 44

No comments

Axminster WS1000TA Specifications Page 6