Authorised Use
This machine is designed for shaping wood and wood
derived materials.
Machining of other materials is not permitted and may
be carried out in specific cases only after consulting
with the manufacturer.
The proper use also includes compliance with the
operating and maintenance instructions given in
this manual.
The machine must be operated only by persons
familiar with its operation and maintenance and who
are familiar with its hazards.
The required minimum age must be observed.
07
General Instructions for 230V Machines
It is good practice to leave the machine unplugged
until work is about to commence, also make sure to
unplug the machine when it is not in use, or
unattended. Always disconnect by pulling on the plug
body and not the cable. Once you are ready to
commence work, remove any tools used in the setting
operations (if any) and place safely out of the way.
Re-connect the machine.
Carry out a final check e.g. check the cutting tool is
securely tightened in the machine, check you have the
correct speed and function set, check that the power
cable will not ‘snag’ etc. Make sure you are comfortable
before you start work, balanced, not reaching etc.
If the work you are carrying out is liable to generate
dust or chips, wear the appropriate safety clothing,
goggles, gloves, masks etc. If the work operation
appears to be excessively noisy, wear ear-defenders. If
you wear your hair in a long style, wearing a cap, safety
helmet, hairnet, even a sweatband, will minimise the
possibility of your hair being caught up in the rotating
parts of the machine, likewise, consideration should be
given to the removal of rings and wristwatches, if these
KEEP THE WORK AREA AS UNCLUTTERED AS IS PRACTICAL. UNDER NO
CIRCUMSTANCES SHOULD CHILDREN BE ALLOWED IN WORK AREAS.
DO NOT WORK WITH CUTTING OR BORING
MACHINE OF ANY DESCRIPTION IF YOU ARE
TIRED, YOUR ATTENTION IS WANDERING OR
YOU ARE BEING SUBJECTED TO
DISTRACTION.
DO NOT USE THIS MACHINE WITHIN THE
DESIGNATED SAFETY AREAS OF
FLAMMABLE LIQUID STORES OR IN AREAS
WHERE THERE MAY BE VOLATILE GASES.
are liable to be a ‘snag’ hazard. Consideration should
also be given to non-slip footwear, etc. If you are
allowing another person to use the machine, ensure
that they are suitably qualified to use it. Check that
cutters are the correct type and size, are undamaged
and are kept clean and sharp, this will maintain their
operating performance and lessen the loading on the
machine. Above all, OBSERVE…. make sure you know
what is happening around you, and
USE YOUR
COMMON SENSE.
Specific Safety Precautions
The machine must only be used in a technically perfect
condition.
When working on the machine, all safety mechanisms
and covers must be in operation.
In addition to the safety requirements contained in
these operating instructions and your country’s
applicable regulations, you should observe the
generally recognized technical rules concerning the
operation of woodworking machines.
Any other use exceeds authorisation.
In the event of unauthorised use of the machine, the
manufacturer renounces all liability and the
responsibility is transferred exclusively to the operator.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals