Axminster AW8SRG2 Specifications download pdf (Page 4)

510

Section

axminster.co.uk/signup for our exclusive email offersCall 03332 406406

Waterstones

These are superﬁ ne grits.

The stones are used to bring the metal to an

absolute mirror ﬁ nish, and hence an ultra sharp edge. These

stones are hard and so only need to be sprinkled with water just

before use, and left dry at all other times. They are mounted on

bases, the 4,000 and 6,000 grit are 190mm x 63mm x 19mm, the

10,000 grit 200mm x 75mm x 25mm. The 10,000 grit stone is

supplied with a Nagura stone.

This 800 grit stone is a

top quality Ice Bear brand

stone and a real must in the

waterstone armoury. Used to ﬂ atten the backs of blades and

form the edge, it leaves the metal dull but smooth. Size 200mm x

63mm x 30mm.

The very coarse 240 grit stone

cuts with amazing speed, but

as is the nature of these stones,

wears somewhat quicker than an

oilstone. However, it can easily be re-trued, so

this massive 205 x 75 x 50mm lump is going to last a long time.

Use for badly nicked edges. Slightly smoother is the 400 grit stone

(205 x 75 x 50mm), excellent for reforming the bevels on worn

plane irons and chisels.

For anyone who has not used a

Japanese waterstone before then a

combination provides a good introduction. Size 200 x 50 x 25mm.

250/1,000 Grit £24.44 £20.37 510468

1,000/6,000 Grit £33.95 £28.29 510469

Inc.vat Ex.vat Code

Japanese

Combination

Waterstones

wears somewhat quicker than an

oilstone. However, it can easily be re-trued, so

240 Grit £46.44 £38.70 384028

400 Grit £55.94 £46.62 500279

Inc.vat Ex.vat Code

Japanese Coarse

Waterstones

There is no better kit for someone sharpening with waterstones

for the ﬁ rst time. The kit contains a 200mm(8”) by 62mm(2.1/2”)

800 grit stone for initial grinding, a 175mm(7”) by 62mm(2.1/2”)

6,000 grit ﬁ ne ﬁ nishing stone, a non-skid waterstone holder and a

Nagura stone for cleaning off the glazed surface of the ﬁ ne stone.

All you need to get started.

Sharpening Kit £76.44 £63.70 810204

Inc.vat Ex.vat Code

Ice Bear Waterstone

Sharpening Kit

Japanese Med/Coarse

Waterstone

800 Grit £25.44 £21.20 510466

Inc.vat Ex.vat Code

Japanese

Medium

Waterstone

Medium 1,200 grit waterstones are used to remove scratches and

further reﬁ ne and partly polish the surface following honing on

a coarse stone. The Ice Bear brand medium stone measures 200

x 63 x 30mm, the extra width allowing them to accommodate a

2.3/8” wide plane iron.

1,200 Grit £25.44 £21.20 510464

Inc.vat Ex.vat Code

Japanese Fine

& Polishing

Waterstones

4,000 Grit £26.94 £22.45 384022

6,000 Grit £41.94 £34.95 510465

10,000 Grit £93.95 £78.29 384033

Inc.vat Ex.vat Code

BESTER waterstones, manufactured by Imanishi in Kyoto, Japan

have almost become the standard with Japanese professional

woodworkers. They feature a moderately strong bond that allows

abrasive particles release quickly, maintaining a fast cutting rate,

yet resist wear. These stones behave similarly to a natural stone,

the feedback tells you how fast they cut. Tests have shown they

abrade O1, A2 and M2 steels at a rapid rate and remain ﬂ at just as

long as slower cutting stones with stronger bonds. Bester 1,000

grit stones have a vitriﬁ ed bond and should be soaked for about

15 minutes before use. The ﬁ ne 4,000 and 8,000 grit resin-bonded

Imanishi stones need just a quick spray. Overall dimensions are

205mm x 75mm x 25mm.

Bester

Imanishi

Waterstones

Waterstone 1,000 Grit £45.44 £37.87 502267

Waterstone 4,000 Grit £53.45 £44.54 502269

Waterstone 8,000 Grit £77.94 £64.95 502270

Waterstone 1,000/6,000 Grit £66.95 £55.79 502271

Inc.vat Ex.vat Code

Originally designed for sharpening high alloy steels, these stones

perform very well on the toughest steels. Signiﬁ cantly faster, they

are between two and ﬁ ve times faster than waterstones that have

less durable abrasive or stronger bonds. Sintered under heat and

pressure, a Sigma stone readily releases new, aggressive particles

during use. The 1,000 grit produces a primary bevel, the 3,000 grit

quickly establishes a micro-bevel and the 10,000 grit provides a

ﬁ ne ﬁ nish. All require only a few minutes of soaking before use, do

not keep in water.

Sigma Japanese

Ceramic Waterstones

Ceramic Waterstone 1,000 Grit £63.44 £52.87 502272

Ceramic Waterstone 3,000 Grit £67.94 £56.62 502273

Ceramic Waterstone 10,000 Grit £106.44 £88.70 502274

Inc.vat Ex.vat Code

The stones are used to bring the metal to an

Japanese Fine

Made to hold waterstones up to 210mm(8.1/4”) in length.

Rubber holders at either end, one ﬁ xed and one sliding, which

can be tightened by means of two knurled screws to hold the

waterstone ﬁ rmly but gently. A central rubber block provides

extra support. Grips on the underside prevent your waterstone

walking away whilst you are trying to sharpen a blade. Also

suitable for oil stones and diamond stones.

Non-Skid Holder £13.94 £11.62 417123

Inc.vat Ex.vat Code

Axminster Non-Skid Holder

The spray head can be adjusted from a powerful jet to

a gentle mist spray pattern. Very useful if you sharpen

your tools with waterstones or diamond stones.

Spray - 750ml £2.26 £1.88 718492

Inc.vat Ex.vat Code

Axminster

Spray Bottle

Ex.vat Code

Amongst the many advantages of sharpening tools with a Japanese

waterstone is the ease of ﬂ attening or resurfacing of the stone. This

gives the user the option of always sharpening on a ﬂ at surface,

thus obtaining the very best results. Use this new 150 grit ceramic

stone to regularly dress the stone. The hard ceramic particles and

bond means it will never wear out in normal use. Keep one to hand

and use frequently by just rubbing it with a circular motion across

the top of the waterstone. Size 155 x 52 x 25mm.

Flattening Stone £16.94 £14.12 368770

Inc.vat Ex.vat Code

Ice Bear Ceramic

Flattening Stone

Used for cleaning a glazed surface or creating a slurry prior to

honing on ﬁ ner stones, thereby speeding up the process. These

artiﬁ cial Nagura stones are the equivalent of the 8,000 gold

stone and therefore there will not be a problem with particle

contamination when used on other grit stones. Size: 70 x 20 x 23mm

Nagura Stone £3.44 £2.87 510470

Inc.vat Ex.vat Code

Japanese

Nagura Stone

A compact and comprehensive system for both the use and

storage of waterstones up to 300mm long. Twin clamping arms

hold both coarse and ﬁ ne stones at the same time. When not in

use a cover keeps the stones clean. The large base unit has room

enough for three or more stones. Manufactured from tough,

rigid ABS with all metal parts in non-corrosive stainless steel and

anodised aluminium. The cover consists of a tempered glass plate

backed with laminate which can be used in conjunction with 90

grit silicon carbide (supplied) to lap the stones to a ﬂ atness of

plus or minus 0.001” per inch of stone length.

Stone Pond £61.94 £51.62 600318

Inc.vat Ex.vat Code

Veritas

Waterstone

Pond

The DMT Dia-Flat™ Lapping Plate will ﬂ atten most sharpening

stones, waterstones, oilstones or Arkansas stones. It is a

combination of supreme ﬂ atness and DMT’s Diamond Hardcoat

Technology™. It will outlast any other diamond coating on the

market. DMT individually inspect EVERY Lapping Plate to make

sure it meets strict speciﬁ cations. Each plate includes a certiﬁ cate

for ﬂ atness, guaranteed to be less than ±0.0127mm across its

surface. The 120-micron surface cuts fast and produces excellent

results. Size 254 x 102 x 10mm.

Dia Flat Lapping Plate £214.94 £179.12 502408

Inc.vat Ex.vat Code

DMT Dia Flat

Lapping Plate

18_Sharpening 509_527.indd 510 29/11/2013 13:31

1 2 3 4 5 6 7 8 9 ... 18 19

Comments to this Manuals

No comments

Axminster AW8SRG2 Specifications Page 4

Comments to this Manuals

Related products and manuals for Straight grinders Axminster AW8SRG2